Settings
Fast Delivery
Free Shipping
Incoterms
Payment Types
Marketplace Product
Automotive
Key Components for Full Electric Vehicles (FEVs)
- Electrical Motor Drives (DC/AC)
- Battery Management and DC/DC
- On-Board Chargers
- HVAC - (P)HEV and EV
Electrical Motor Drives (DC/AC)
Resistors
High Voltage Thin Film Flat Chip Resistors
- High operating voltage 1000 V in 1210 size Low voltage coefficient < 1 ppm/V
- Excellent overall stability at different environmental conditions ≤ 0.05 %
- Down to 10ppm/K and 0.1% tolerance
Resistors
Surface-Mount Molded Dividers, High Voltage
- Voltage up to 1415 V
- Maximum resistance ratio of 700:1
Film Capacitors
Metallized Polypropylene DC-Link Film Capacitors
- High-performance DC-Link capacitor with high RMS current capabilities
- Automotive Grade AEC-Q200 compliant
Inductors
High Current Through-Hole Inductors, Edge-Wound Series
- High temperature continuous operation, up to 180 °C with no aging
- Low DCR to minimize losses and reduce temperature rise
Resistors
Ultra Precision Thin Film Chip Resistors, Tolerance down to 0.02 %, TCR down to 2 ppm/K, 0402 to 1206 Case Sizes
- Low temperature coefficients and tight tolerances
- Excellent overall stability < 0.05 % (1000 h rated power at 70 °C)
- Sulfur resistance verified according to ASTM B 809
Resistors
High Pulse Load Carbon Film MELF Resistors, Pulse Handling Up to 3 kW, ESD Up to 16 kV
- Ultimate surge handling up to 16 kV ESD, 17 kW 1.2 / 50, VDE safety approval
- AEC-Q200 qualified, sulfur resistant, GREEN product
Small Signal Diodes
Zener Diodes With Surge Current Specifications, Voltage Range from 3.6 V to 200 V With ± 2 %
- Sillicon planar Zener diodes
- Voltage range includes 43 breakdown voltages from 3.6 V to 200 V with ± 2 % for BZD27B-M Series
MOSFETs
Automotive E Series Power MOSFET with fast body diode, 700 V, 62 A, 45 mΩ
- Fast body diode MOSFET using Automotive Grade E series technology
- Reduced trr, Qrr, and IRRM
Resistors
Wirebondable Gate Resistors for IGBT Applications
- Back-contact resistors for single wirebond assembly with power ratings up to 4 W
- Available case sizes from 0202 to 2010
Film Capacitors
Metallized Polypropylene DC-Link Film Capacitors, 450 VDC to 1000 VDC
- Slim line, low building height
- Very long useful life time: Up to 100 000 h at UNDC and 70 °C
Resistors
Cemented Leaded Wirewound Resistors, High Pulse Load
- AEC-Q200 qualified AC-AT series
- High power dissipation in small design
Film Capacitors
THB Grade IIIB Class Y2 Interference Suppression Film Capacitor Radial MKP 305 VAC - Line Bypass
- IEC 60384-14: 2013 / AMD1: 2016 grade IIIB certified: 85 °C, 85 % RH, 1000 h at URAC
- AEC-Q200 qualified
Battery Management and DC/DC
Resistors
Long-Side Termination Thick Film Resistors, 250 mW to 2 W in 0406 to 1225 sizes, 1 Ω - 1 mΩ
- Operating temperature up to 155 °C , TCR = 100 ppm/K to 200 ppm/K
Resistors
High Pulse Load Carbon Film MELF Resistors, Pulse Handling Up to 3 kW, ESD Up to 16 kV
- Ultimate surge handling up to 16 kV ESD, 17 kW 1.2 / 50, VDE safety approval
- AEC-Q200 qualified, sulfur resistant, GREEN product
Resistors
SMD Power Resistors, 35 W, 10 mΩ to 550 KΩ, Non-Inductive
- TO-263 package, TCR = 150 ppm/K
- AEC-Q200 qualified
Resistors
Power Metal Strip® Battery Shunt Resistor, Very Low Value (50 μΩ, 100 μΩ, 125 μΩ, and 250 μΩ)
- High power to resistor size ratio (36 W in 8518 package)
- AEC-Q200 qualified
Small Signal Diodes
500 mW Zener diodes in < 0.6 mm low-profile MicroSMF (DO-219AC) package
- Excellent stability for voltage stabilization and reference voltage generation
- Zener diodes permitting 500 mW power dissipation
- Green product, fully halogen-free
Inductors
IHLE® High Current Inductors With E-Field Shield
- High temperature, up to 155 °C
- Integrated E-Shield for maximum EMI reduction
Optoelectronics
Phototransistor Optocouplers, SOP-4 Package, Low 1 mA Forward Current
- AEC-Q101 qualified
- High CTR with low input current
Inductors
Power SMD IHLP® Storage Inductors, 0.22 µH to 22 µH
- Soft saturation, high rated current, temperature up to 155 °C
Resistors
High Voltage Thin Film Flat Chip Resistors
- High operating voltage 1000 V in 1210 size Low voltage coefficient < 1 ppm/V
- Excellent overall stability at different environmental conditions ≤ 0.05 %
- Down to 10ppm/K and 0.1% tolerance
Ceramic Capacitors
AEC-Q200 Qualified, Sizes 0603-0805-1206, 50 V, 100 V, and 200 V in X7R
- AEC-Q200 qualified with PPAP available
- Meets ESD AEC-Q200-002B level 6
Resistors
Surface-Mount Molded Dividers, High Voltage
- Voltage up to 1415 V
- Maximum resistance ratio of 700:1
Thermistors
SMD Glass-Protected NTC Thermistors
- TCR ranging from -7 %/K at -40 °C to -2 %/K at 150 °C
- Tolerance on R25 down to 1 %, and on B25/85 down to 1 %
- Suitable for wave or reflow soldering
Protection Diodes
Low capacitance single line ESD protection diode in SOD-523
- Compact SOD-523 package
- Low package height < 0.75 mm
Resistors
Pulse Proof, High Power Thick Film Chip Resistors
- Excellent pulse load capability
- Enhanced power rating, double-side printed resistor element
- High power thick film chip resistors is the perfect choice for power measurement
Resistors
Cemented Leaded Wirewound Resistors, High Pulse Load
- AEC-Q200 qualified AC-AT series
- High power dissipation in small design
Power Rectifiers
3 A 60 V Dual High-Voltage TMBS® (Trench MOS Barrier Schottky) Rectifier
- Trench MOS Schottky technology
- Low profile package
On-Board Chargers
Ceramic Capacitors
X1/Y1 and X1/Y2 AC Line Rated Ceramic Disc Capacitors for Automotive Applications
- AEC-Q200 qualified
- Withstands 85 / 85 / 1000 h test
Resistors
High Pulse Load Carbon Film MELF Resistors, Pulse Handling Up to 3 kW, ESD Up to 16 kV
- Ultimate surge handling up to 16 kV ESD, 17 kW 1.2 / 50, VDE safety approval
- AEC-Q200 qualified, sulfur resistant, GREEN product
Resistors
SMD Power Resistors, 35 W, 10 mΩ to 550 KΩ, Non-Inductive
- TO-263 package, TCR = 150 ppm/K
- AEC-Q200 qualified
Resistors
Power Resistor Thick Film Technology
- High power 100 W at 25°C on heatsink, tolerance down to 1 %
- High power 50 W at 25°C on heatsink, tolerance down to 1 %
- Pre-discharge, snubber, breaking
Resistors
Surface-Mount Molded Dividers, High Voltage
- Voltage up to 1415 V
- Maximum resistance ratio of 700:1
Resistors
Wirebondable Gate Resistors for IGBT Applications
- Back-contact resistors for single wirebond assembly with power ratings up to 4 W
- Available case sizes from 0202 to 2010
Thermistors
PTC Thermistors, Inrush Current Limiter and Energy Load-Dump
- High energy absorption levels up to 240 J, self-protecting
- High direct voltage up to 1000 VDC at increased ambient temperature up to 105 °C
Power Rectifiers
30 A FRED Pt® Hyperfast Rectifiers
- Hyper fast and soft recovery time
- Low forward voltage drop
Optoelectronics
Phototransistor Optocouplers, SOP-4 Package, 5 mA Forward Current
- AEC-Q101 qualified
- High CTR with low input current
Ceramic Capacitors
AEC-Q200 Qualified, Sizes 0603-0805-1206, 50 V, 100 V, and 200 V in X7R
- AEC-Q200 qualified with PPAP available
- Meets ESD AEC-Q200-002B level 6
Ceramic Capacitors
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
- Flexible termination “W” for improved bending capability performance available
- Usage as X1/Y2 and X2 Safety Capacitor
- Wet build process, Reliable Noble Metal Electrode (NME) system
Resistors
Thick Film Power Resistors, Mounting on to a Heatsink
- AEC-Q200 qualified
- Compliant with requirement #26 of NF-EN45545-2
Film Capacitors
THB AC and Pulse Metallized Polypropylene Film Capacitors
- High temperature operation up to 125 °C
- THB 60 °C 93 % RH for 56 days at rated voltage
- Ideal as LLC-Resonance Capacitors
Film Capacitors
Metallized Polypropylene DC-Link Film Capacitors
- High-performance DC-Link capacitor with high RMS current capabilities
- Automotive Grade AEC-Q200 compliant
Resistors
Thick Film Chip Resistors, Medium Voltage
- AEC-Q200 qualified
- Voltages up to 3000 V
Magnetics
High Voltage Common Mode Choke, Surface-Mount
- Low SMD profile design compatible to automated assembly
- High heat rating current to 31 A and saturation current to 35 A
Resistors
High Voltage Thin Film Flat Chip Resistors
- High operating voltage 1000 V in 1210 size Low voltage coefficient < 1 ppm/V
- Excellent overall stability at different environmental conditions ≤ 0.05 %
- Down to 10ppm/K and 0.1% tolerance
Resistors
Cemented Leaded Wirewound Resistors, High Pulse Load
- AEC-Q200 qualified AC-AT series
- High power dissipation in small design
Thyristors
Thyristor, Surface Mount, Phase Control SCR
- Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
- AEC-Q101 qualified
Film Capacitors
THB Grade IIB Class X2 Interference Suppression Film Capacitor Radial MKP 305 VAC - Across the Line
- AEC-Q200 qualified (rev. D)
- IEC 60384-14: 2013 / AMD1: 2016 grade IIB: 85 °C, 85 % RH, 500 h at URAC
Film Capacitors
THB Grade IIIB Class Y2 Interference Suppression Film Capacitor Radial MKP 305 VAC - Line Bypass
- IEC 60384-14: 2013 / AMD1: 2016 grade IIIB certified: 85 °C, 85 % RH, 1000 h at URAC
- AEC-Q200 qualified
HVAC - (P)HEV and EV
Film Capacitors
Metallized Polypropylene DC-Link Film Capacitors, 450 VDC to 1000 VDC
- Slim line, low building height
- Very long useful life time: Up to 100 000 h at UNDC and 70 °C
Resistors
High Pulse Load Carbon Film MELF Resistors, Pulse Handling Up to 3 kW, ESD Up to 16 kV
- Ultimate surge handling up to 16 kV ESD, 17 kW 1.2 / 50, VDE safety approval
- AEC-Q200 qualified, sulfur resistant, GREEN product
Resistors
SMD Power Resistors, 35 W, 10 mΩ to 550 KΩ, Non-Inductive
- TO-263 package, TCR = 150 ppm/K
- AEC-Q200 qualified
Resistors
Power Resistor Thick Film Technology
- High power 100 W at 25°C on heatsink, tolerance down to 1 %
- High power 50 W at 25°C on heatsink, tolerance down to 1 %
- Pre-discharge, snubber, breaking
Resistors
Surface-Mount Molded Dividers, High Voltage
- Voltage up to 1415 V
- Maximum resistance ratio of 700:1
Optoelectronics
Phototransistor Optocouplers, SOP-4 Package, 5 mA Forward Current
- AEC-Q101 qualified
- High CTR with low input current
Thermistors
PTC Thermistors, Inrush Current Limiter and Energy Load-Dump
- High energy absorption levels up to 240 J, self-protecting
- High direct voltage up to 1000 VDC at increased ambient temperature up to 105 °C
Inductors
High Current Through-Hole Inductors, Edge-Wound Series
- High temperature continuous operation, up to 180 °C with no aging
- Low DCR to minimize losses and reduce temperature rise
Magnetics
High Voltage Common Mode Choke, Surface-Mount
- Low SMD profile design compatible to automated assembly
- High heat rating current to 31 A and saturation current to 35 A
Power Rectifiers
30 A FRED Pt® Hyperfast Rectifiers
- Hyper fast and soft recovery time
- Low forward voltage drop
Film Capacitors
Interference Suppression Film Capacitors, MKP Radial Potted Type
- RFI X2 capacitor for standard across-the- line applications
- Automotive grade, AEC-Q200 compliant
Resistors
Power Metal Strip® Resistors, Very High Power (to 15 W), Low Value (down to 0.0001 Ω), Surface-Mount
- All welded construction of the Power Metal Strip® resistors are ideal for all types of current sensing, voltage division and pulse applications
Film Capacitors
THB AC and Pulse Metallized Polypropylene Film Capacitors
- High temperature operation up to 125 °C
- THB 60 °C 93 % RH for 56 days at rated voltage
- Ideal as LLC-Resonance Capacitors
Thermistors
NTC Thermistors, Standard Lug Sensors
- Robust surface temperature sensor
- AEC-Q200 compliant, UL recognized
Malaysia